Used EVC BDM100 Complete Kit

Used EVC BDM100 programmer, includes a complete set of 10 probes and BDM positioning frame.

bdm100_kit

The BDM100 tool can be used to program ECUs with Motorola MPC555 – 565 microprocessors.

This generation of Motorola processors contain 448KB – 1MB Flash memory. That memory cannot be read and programmed with an eprom programmer. It is achievable using the so called “BDM” interface via the 10-14 pin programming port. Using the BDM frame and ECU specific adaptor/probe it is possible to connect to the BDM port without soldering.

Included with the package is the BDM100 interface, power supply, USB cable and flat 10 pin cable.

Buy Now


Currently these ECUs are successfully tested with the BDM100:

  • Bosch BMS-Kexample BMW K1200RS
  • Bosch EDC16 example VAG, BMW, MB, PSA
  • Bosch EDC16+ example PSA, BMW
  • Bosch EDC16+ example VAG
  • Bosch EDC7example Iveco
  • Bosch ME9.0Cexample Volvo, Ford Focus ST
  • Bosch BMWexample BMW R4 + V8
  • Bosch ME9-2example BMW BMW R4 + V8
  • Bosch ME9-3 example BMW BMW R4 + V8
  • Bosch ME9.7example MB MB 350, 500
  • Bosch MED9.1example VAG VAG 2.0L TFSI
  • Bosch MED9.5.20 VAGexample VAG 1.6/2.0L FSI
  • Bosch MED9.7 MBexample MB  C350
  • Caterpillar PPCCMF example Massey Ferguson
  • Chrysler ETC5example Chrysler 300C
  • Deere L14example John Deere
  • Delphiexample Jaguar, Ford 2.0TDCI
  • Delphi DCM3.2example MB, Kia, Ssangyong
  • Delphiexample Isuzu Dmax
  • Marelli MJD example Opel, Fiat
  • Siemens MS45example BMW 6-Zyl.
  • Siemens MSS65 example BMW M5 V10
  • Siemens MSV70/ MSS70example BMW 3.0i
  • Siemens PPD1.x example VAG 2.0 TDI
  • Siemens SID201 example Jaguar/Land Rover 2.7D V6
  • Siemens SID202example Ford 1.8TDCI
  • Siemens SID203 example Jaguar 2.7D
  • Siemens SID204example Land Rover
  • Siemens SID206example Ford S-Max
  • Siemens SID803 example Volvo Diesel
  • Siemens SIM266 example MB A200
  • Siemens SIM2Kexample Hyundai
  • Siemens SIM90E example Dodge Caliber 1.8L
  • Siemens SIM90Pexample Dodge Avenger 2.4L
  • Siemens Simos 6.x example Audi A6 2.4L V6
  • TRW EMS2example Volvo LKW, Renault LKW

This product is designed to be operated by the WinOLS software, where you can directly read/write the ECU content in bin format and edit the files freely. Access to all memories is available.

For non WinOLS users, it is also possible to read/write using the BDMtogo software, however files will be saved in an encrypted format which can only be managed and edited by WinOLS users.

Posted in: