OBD-UCC4_2

This universal pin out cable allows you to connect easily and comfortably to most types control units.

Now with even more connections and pins types, you can connect to a wide variety of ECU’s.

The cable is fitted with an OBD2 female plug allowing connection any OBD flash tool.

It features:

  • Female OBD2 port
  • Power connections by 12V and GND crocodile clips or 2.1mm DC power jack. (Power supply not included)
  • LED indicator to confirm when ECU is ON.
  • 6 x 12V connectors for ECU
  • 6 x GND connectors for ECU
  • 3 x switched ignition connectors for ECU
  • Switched ECU Power (ON/OFF)
  • Switched CAN bus termination resistors (60Ω / 120Ω / OFF)
  • Switch-able ignition pins (OFF / ON / K-Line) for tools using K-Line for reset function
  • 2 x CAN Low
  • 2 x CAN High
  • 1 x CAN2 Low (Ford / Volvo)
  • 1 x CAN2 High (Ford / Volvo)
  • 2 x K-Line
  • 1 x L-Line
  • Kline with diode N4148 for reset function
  • Bootpins: 560Ω / 1KΩ / 4.7KΩ

OBD-UCC4_1