The latest update for PCMFlash is now available, here is the full release info:


Added module 62 “Ford / Getrag 6DCT450”, designed to work with the 6DCT450 TCUs installed Ford / Volvo / JLR vehicles. It supports reading, writing, cloning!

PowerShift TCM (6DCT450) [RD / WR]
PowerShift 6DCT450 Boot (MICRO / EEPROM) [RD / WR]


Added module 63 “Renault DC4”, designed to work with the DC4 TCU installed Renault vehicles. It supports reading, writing and checksum correction.

EDC DC4 Gearbox (TC1766 / 1506KB) [RD / WR / CK]


Added module 64 “Mitsubishi Fuso Canter”, designed to work with EDC7 / EDC16 / EDC17 ECU of Mitsubishi Fuso Canter diesel engines. It supports reading, writing and checksum correction. For some vehicles with an EDC7 / EDC16 control units, a direct connection to the unit connector may be required.

Fuso Canter (EDC7C4-6 / EDC16C31) [RD / WR / CK]
Fuso Canter Euro 5 CAN-bus (EDC17CP15) [RD / WR / CK]
Fuso Canter Euro 5 CAN-bus (EDC17CP52) [RD / WR / CK]


Module 23 “Subaru Denso” – Euro 6 diesel and 2018MY petrol models have been added. It supports reading, writing and checksum correction.

1.6L, 2.0L DI Denso 2018+ CAN-bus (1N83M / 1.5MB) [RD / WR / CK]
2.0L Denso Diesel Euro 6 CAN-bus (SH72543 / 2MB) [RD / WR / CK]


Module 25 “Renault / Nissan dCi” – SID309 installed in Renault Master 2.3L dCi vehicles has been added. It supports reading, writing and checksum correction.

2.3 L dCi SID 309 (TC1767 / 2MB) [ RD / WR / CK ]


Module 29 “Ford PWM” – PCM150 has been added. It supports reading, writing and checksum correction.

3.0L, 4.0L, 4.6L Duratec V6 / V8 (PCM150) [RD / WR / CK]


Module 34 “Kia / Hyundai EDC15 / EDC16” – EDC15C7 has been added. It supports reading, writing and checksum correction.

2.0L, 2.5L CRDI K-Line (EDC15C7) [RD / WR / CK]


Module 35 “Toyota / Lexus / Scion / Hino” – Hybrid control units added. It supports writing and checksum correction.

76F0038 / 39/40/50/70/85 HV Control CAN-bus [WR / CK]


Module 4 “Scania EMS S7 / S8” – EMS S8 has been added. It supports writing and checksum correction.

Scania EMS S8 250Kbps (MPC5566) [WR / CK]
Scania EMS S8 500Kbps (MPC5566) [WR / CK]


Module 53 “Infineon Tricore BSL” now reads passwords for Continental SID 208 (PSA), Bosch MED17.9.3 (Honda). Also now reads and writes the external EEPROM on Delphi CRD3.1 (Mercedes-Benz).

Delphi CRD3.1 EEPROM (32KB)


Module 57 “SIMOS 8/10/11 / PCR2.1” – SIMOS8.1 / 8.3 added. It supports reading, writing (without the need for unlocking by BSL!) and checksum correction.

2.8L V6 FSI (SIMOS8.1) [RD / WR / CK]
3.0L V6 TFSI (SIMOS8.3) [VR / WR / CK]


Module 58 “VAG DSG / CVT” – VL300 / V30 / DQ200 TP2.0 / DQ250 TP2.0 and DQ500 added. Operating in both BSL/OBD mode for the VL300 / V30 and OBD support for with DQ200, DQ250 and DQ500.

DQ200 (0AM) [WR / CK]
DQ250 Cxx (02E) [RD / WR / CK]
DQ250 Exx/Fxx (02E) [WR / CK]
VL300 / V30 (01J / 0AN) [WR / CK]
DQ500 (0BH / 0BT) [RD / WR / CK]
VL300 / V30 BSL (FLASH) [RD / WR / CK]
VL300 / V30 BSL (EEPROM) [RD / WR / CK]