FRC iFlash – OBD Tuning Programmer

iFlash

The Frieling Racing i-Flash system is specially designed software and hardware which will allow the end user to:

  • Comfortably read the vehicle’s ECU calibration.
  • Safely program the ECU flash memory with a tuned file.
  • Restore the ECU to the original state at any time.
  • Read out diagnostic trouble codes (DTC’s).
  • Clear diagnostic trouble codes (DTC’s).

All procedures are carried out from the vehicle’s OBD port.

This device is for use on a single vehicle and will become VIN locked once used.

It can be used with any of the i-Flash suites listed below.

 

The i-Flash reads and writes encrypted files only. We can provide the encryption/decryption service, however we do not provide tuning files.
Alternatively a master decoder device is available at extra cost for professional tuners who wish to handle their own files.

In the case where reading from OBD is not supported, the original file can be sourced via BDM/Boot read or requested from our database and will be provided if available.

More Info

 


BMW-iFlashBMW / Mini i-Flash

The BMW/Mini i-Flash works with all BMW vehicles up to the F-Series and Mini until 2010/2011. It allows you to read out the calibration data and also the full ECU memory where available.

Popular models such as the M3, M5, M6 are supported by i-Flash! Other platforms including N54 engine vehicles and all Mini vehicles fitted with the supercharged or turbocharged engine are supported.

In addition to the reading and writing functions, a basic diagnostic tool to read and clear trouble codes is also included.

Available BMW Protocols


Ford-iFlashFord i-Flash

The Ford i-Flash supports vehicles fitted with petrol engines.

Popular models such as the Ford Focus ST and RS are covered.

This allows reading and writing of the ECU and also includes a basic diagnostic tool for reading and clearing error codes.

 

 

Available Ford Protocols


Lotus-iFlashLotus i-Flash

The Lotus i-Flash is very special since it is one of the only tools which supports these kind of ECU’s.

Unlike the other i-Flash clients, Lotus ECU’s can not be read. However, once the tool has retrieved the ID from the ECU, we can provide the matching software which can be used to create the tuned file.

This file can also be used to flash the ECU back to it’s original state.

 

 

Available Lotus Protocols


MB-iFlash

Mercedes i-Flash

The Mercedes iFlash is a new module and currently covers the ME9 ECU.

It is fitted in C63 AMG vehicles.  

Allows ID and writing of the ECU flash memory.

Reading is not supported, the original file can be sourced via BDM read or requested from our database and will be provided if available.

 

Available Mercedes Protocols


Porsche-iFlash

Porsche i-Flash

The Porsche i-Flash works with all Porsche 911, Boxster and Cayman vehicles from 1999 to 2012. It also does the Cayenne 957 platform from 2008-2010. It allows you to read out the calibration data and also the full ECU memory where available.

Popular models such as the 996/997 Turbo, 987 Cayman/Boxster, and Cayenne Turbo are supported by i-Flash!

In addition to the reading and writing functions, a basic diagnostic tool to read and clear trouble codes is included which will also do the required throttle body adaption process for DFI vehicles.

 

Available Porsche Protocols


PSA-iFlashPSA i-Flash

This i-Flash suite caters for vehicles produced by the PSA Group.

Includes the following brands:

– Citroen
– Peugeot
– DS Automobiles

Allows programming of the ECU flash memory.

Available PSA Protocols


GM-iFlashOpel / GM i-Flash

This i-Flash module covers many GM brands such as:
 – Chevrolet
 – Opel
 – Pontiac
 – Saab
 – Opel
 – Vauxhall 

Allows reading and writing of the ECU flash memory.

 

Available GM Protocols


VAG-iFlashVAG i-Flash

The VAG i-Flash covers a large range of Volkswagen Audi Group vehicles. This includes Volkswagen, Audi, Lamborghini, Bentley, Porsche 955 Cayenne, Seat, Skoda and others.

Popular vehicles supported such as Audi S4, Audi R8, various Volkswagen GTI models and Bentley Continental GT.

In addition to the reading and writing functions, a basic diagnostic tool to read and clear trouble codes is included.

 

Available VAG Protocols


VAG-iFlashVAG Gearbox i-Flash

This iFlash suite supports transmission controllers used by the VAG group.

Allows ID and writing of the ECU flash memory.

Reading is not supported from OBD, however in some cases it can be read direct from the gearbox connector using a specific wiring harness (this can be supplied at extra cost). The original file can also be requested from our database and will be provided if available.

An additional license can be purchased in order to use a single client flasher on the engine and gearbox control units on the same vehicle.

Available VAG Gearbox Protocols

Posted in: