MAGPro2 BDM MPC5xx

MAGPro2 BDM

The MAGPro2 BDM programmer is a modern device that allows you to read, program, backup, and restore the three main ECU components with the Motorola Microprocessor Series MPCXX inside the ECU and it supports many cars, bikes, trucks and tractors.

The communication between the BDM programmer and the ECU takes place by using 8 cables and a bench with special adapters (optional). There is NO need to solder any contact strip bars on to the BDM port of the ECU in order to create a connection on the board. Backup/Restore functions allow you to read all the contents of the ECU in a single file. The accuracy of this reading is ensured by a special software procedure that automatically checks the data. Security is furthermore ensured thanks to automatic checksum corrections during the writing procedure. Through these two functions you can always undo the operations and restore the initial conditions of the ECU (except for physical ECU damages).

What’s more: thanks to the Backup/Restore functions you can also create a copy of the ECU which can be used with a different hardware, in case the original one was either destroyed or merely damaged.

The BDM Programmer is available as an add-on module for the MAGPro2 X17 tool and the MAGPro2 T-BOOT. We strongly recommend you to use the MAGPro2 BDM MPC5xx with a MAG Bench (optional).

Supported Cars List Pricelist

Contents Overview

MAGPro2 BDM

 

– MAGPro2 BDM interface

– RJ45 Plug In Adapter for BDM

– Software MAGPro BDM

– CRC’s Included

 

 

Main Software

bdm_s
– Intuitive software for ECU data/reading/writing

– Protocols divided by brand & model

– full backup/restore function

– ALL CRC are automatic

– Special functions for MAGBench (light etc)

– Supported by Windows XP SP2, Vista & 7 32bit

 

Breakbox & lines analyser

item 4

– Communication & power lines analyser

– Soft power up of ECU (by PWM) with short circuit detection

– Automatic ECU power ON/OFF in TC mode -Support K-Line/CAN/Power lines

– Results presented as chart and numbers

– Supported by Windows XP SP2, Vista & 7 32bit

 

Technical support – Helpdesk

helpdesk

 

Each MAGPro2 user with an active account, have an access to the Helpdesk system with installation/operation manuals, ECU pinouts, database of ORI files, knowledgebase etc.

Helpdesk offers also immediate contact with the Tech Support by Online Chat or Ticket System. Ticket system can be used to request free services (as DPF OFF, HotStart etc) and MOD files (payable service).

 

 

Optional Accessories

magpro6a

To simplify our customers work we developed some advanced optional accessories:

– ECU connectors & special cables,

– BDM programmer for MPC5xx,

– BDM bench with adapters: MPC5xx and TC

– Stabilized power adapters 110/240v AC/DC.

 

 

Buy Now