This universal pin out cable allows you to connect easily and comfortably to most types control units.
A variety of pins and extra connections are now used, so you can connect to a many different types of ECU’s.
The cable is fitted with an OBD2 female plug allowing connection any OBD flash tool.
- Female OBD2 port
- Power connections by 12V and GND crocodile clips or 2.1mm DC power jack. (Power supply not included)
- LED indicator to confirm when ECU is ON.
- 6 x 12V connectors for ECU
- 6 x GND connectors for ECU
- 3 x switched ignition connectors for ECU
- Switched ECU Power (ON/OFF)
- Switched CAN bus termination resistors (60Ω / 120Ω / OFF)
- Switch-able ignition pins (OFF / ON / K-Line) for tools using K-Line for reset function
- 2 x CAN Low
- 2 x CAN High
- 2 x K-Line
- 2 x L-Line
- Kline with diode N4148 for reset function
- Bootpins: 560Ω / 1KΩ / 4.7KΩ